FYZ1138 433MHz Miniature Wireless Remote Control Switch Long Distance Mini Receiver

Specifications:
Working voltage: DC 3.6V-24V
Maximum load: 5A (if you control the motor load is less than 3A)
Quiescent current: 3.6 mA-5.5mA
Working frequency: 433MHz
Receive sensitivity: -107dBm and more
Output DC3.6V-DC24V
Support encoding format 1527 learning code
Input: DC3.6V~DC24V
Output: DC3.6V-DC24V
Modulation method: ASK (superheterodyne)
Number of stored remote controls: 10 and less
Working mode: instantaneous, switching,
Learning style: learning button
Working temperature: -20 degrees 80 degrees
Instruction:
1, clear the code: Press the learning button on the module continuously 8 times, the indicator light flashes 7 times and then goes out.
2, instant mode: press the module learning button once, the indicator light is always on, then press the remote control button, the indicator flashes 3 times and then turns off, the learning is successful; if the code is unsuccessful, the indicator light will light up after 15 seconds. .
3, switch mode: press the module learning button 2 times, the indicator light is always on; then press the remote control button, the indicator light flashes three times and then off, then the learning is successful; if the code is not successful, the indicator will exit the research state after 15 seconds .
4, mode: press the module learning button 3 times, the indicator light is always on; then press the button on the remote control, the indicator light flashes three times and then off, then learn successfully; if the code is not successful, the indicator will be after 15 seconds Exit the research state.