Wireless Relay Remote Control Switch

1.Transmitter
Channel: 6CH
Remote control distance: 50 meters / 150 feet
(Note that this is the ideal distance without any blocking and signal interference, and it will rise and fall by about 10 percent - 50 percent with blocking and signal interference.)
Coding: fixed code, soldering 2260 2262
Frequency: 315 / 433Mhz (default 315MHz)
Power: 1 x 12V / 23A battery (with battery delivery)
2.Receiver
Channel: 1CH
Power supply (operating voltage): AC 220V
Relay: 10A / 250V AC, 10A / 125V AC, 10A / 30V DC, 10A / 28V DC
Sensitivity: -105dBm
Working temperature: -40degree - 80degree
Output mode: jog, self-locking adjustable
 Control mode:
Switch / self-lock: press - > on; press again - >off
Press a button once to work / ON. Pressing the same button again is stopped / closed. (1 button switch (receiver) requires 1 button remote control (transmitter).
 Instant / Jogging: press and hold - > On; Release - >Off
Press and hold a button to work/on. Release the finger to stop/close. 1 channel switch (receiver) requires 1 button remote control (transmitter)
 (The factory original settings are temporary, please select the function or change it yourself.)
 Learning and deletion methods:
1. Touch switch The control panel has a learning button for learning and deleting code.
2. Press the learning button once and the indicator lights up and goes out. Press any key on the remote control, the indicator flashes twice and then goes out. This means that you have successfully studied it.
3. You can learn more than 12 PCS 2262 or 1527 chips with different code wireless remote control.
4. Delete the remote control method: Press and hold the learning button for about 8 seconds, the indicator light will be on, and then the code that was learned before will be deleted.
6 x receiver module
2 transmitters (each with a 23A battery shipped)