220V Wireless Remote Control System Receiver

1, 220V 1CH wireless remote control system receiver FYZ1421, suitable for anti-theft alarm, remote control electric door and window, signal control, industrial control, lifting equipment electronic control circuit. Remote control switch module, independent output relay contact, is very suitable for direct control of all types of load; products use wireless fixed code technology, no interference switch. The components of the remote switch assembly can be checked after purchase.
2. Specifications:
Receiver (switch) channel: 1CH
Working voltage: 220V (180V - 240V)
Maximum load current: 10A (preferably less than 7A)
Maximum load: 1500W
Operating frequency: 315MHz / 433 MHz frequency can be selected. If there is no message, we will send 315 MHz
Working temperature: -10 - 60'c
Output: jogging. Inter lock. Self-locking adjustable, input code: learning code
Remote control (transmitter): Operating voltage: DC12V, operating current: 30mA, operating frequency: 315 / 433MHz, frequency distance: 20m - 200 m
(Note that it is an ideal distance without any blocking and signal interference, it will rise and fall by about 10 percent - 50 percent in the case of blocking and signal interference.
3. Work /output form: Jog / no lated: Pressing the button is working / on. Release your finger when you stop/close the same button. One channel switch
Self-locking / auto-off: Press one button at a time. Press the same button again. (Channel switch requires remote button control)
Lock / Off: Pressing the button is working/opening, pressing another button is stopping/closing. (One channel switch requires 2 remote buttons)
4. Learning method: Press the learning button to the LED indicator. Then press the transmitter and the LED indicator flashes 5 times quickly, indicating successful learning.
Deleting code: Press and hold the Learn button on the receiver until the LED is off to indicate that the code has been successfully cleared.
5, Delivery includes: 1 x receiver (without battery, no need to configure the battery), 4 x transmitter (both built-in 27A battery)