FYZ1354 12V 24V 220V Single Wireless Relay Switch

Input voltage: AC85V-AC220V 
RF frequency: 315 MHz 433 MHz
3. RF mode of operation: superheterodyne receiver
4 receiving sensitivity: -107dBm 
5. Remote control distance: > 100 meters (open environment)
6. Decoding method: MCU software coding
7. Storable remote control number: 32 
8. Remote control support type: fixed code, code learning
9. Channel: 1CH 
10. Multiple working modes: (jog/no connection, interlock/lock, self-lock/auto-close)
11. Wiring method: fixed terminal block
12. Rating: 10A 250VAC / 10A 125VAC 
10A 30VDC / 10A 28VDC 
Work / output mode:
1. Jog/No Lock: Pressing the button is working / on.
Release the finger of the same button.
The channel switch requires remote button control.
2. Auto off: Press the button once. Press the same button again.
The channel switch requires remote button control.
3. Interlock/Off: Press one button to press another button to stop.
The channel switch requires 2 remote control buttons.
Clear the code and learn:
1. Clear function - After pressing the "Key" button 8 times, the LED will be deactivated and all remote control data in the memory will be released.
When the LED flashes 5 times, it indicates that the clear function has been completed.
2, learning function - Click the learning button "key", the LED indicator indicates the microprocessor enters the learning state code, press the wireless remote control button to play, the LED light flashes 3 times and then close means the code is successful.
3. The LED flashes to determine the selected function.
Jog function 1 
2 flashes - self-locking function
Flashes 3 times - interlock function
When using for the first time, be sure to clear the factory code and clear the remote control code.
Material: plastic + electronic components