FYZ1352 Access Wireless Remote Control Switch Receiver Module

Working voltage:  DC12V
Working current:  ≤6Ma
Operating frequency:  315.433 MHz (frequency can be adjusted, 315 MHz if there is no information)
Working temperature:  -40°C~ + 80°C
Receiver sensitivity:  ≥-105dBm
Output voltage:  AC / DC (optional)
Output current:   ≤ 10A
Code: Learning code. (jogging/not pulling, interlocking/tightening, automatic locking/automatic closing) 
The output of the worksheet:
Jog / no lated: Pressing the button is working/on. Release your finger when you stop/close the same button. One channel switchSelf-locking/auto-off: Press one button at a time. Press the same button again. (Channel switch requires a remote control button
Lock/Off: Pressing the button is working/opening, pressing another button is stopping/closing. (One channel switch requires 2 remote buttons)
Press the Learn button for 3 seconds and the light will go out.
Then press any button on the remote to send a signal. This means that the flash indicator lights up 3 times until the indicator lights up and learns successfully.
Press the Learn button for about 8 seconds and the light will illuminate to indicate that the information you have left has been successfully deleted.
Material: plastic + metal